Concept redesign by Bronxo Technologies for Varney Manufacturing. Official site: varneymfg.com
Varney Manufacturing, Inc.Contract machine shop · Medford, OR Call the shop541-608-0144

Horizontal machining on FMS pallet cells

Horizontal mills with full 4th axis, fed by pallet systems from 2 to 30 pallets. We invested in FMS systems to run lean and machine precisely, from 25-piece lots to thousands.

Matsuura H-Plus 300 horizontal machining cell on the Varney shop floor

Pallet cells that keep spindles cutting

Our Matsuura H-Plus 300 cell carries 15 pallets and 320 tools on a 20,000 RPM spindle. The two-machine Mazak FH-580/40 cell shares a 30-pallet Palletech system with 25,000 RPM spindles and 120 tools each.

Four sides in one setup

Every horizontal on the list has a full 4th axis, so a fixture on a pallet can present several faces of a part to the spindle without a second setup.

Sized for small and mid-size parts

Travels run from X 19.68 / Y 22.042 / Z 19.68 in. on the H-Plus 300 to X 28.74 / Y 28.74 / Z 29.13 in. on the Mazak HCN 5000 FMS.

⌖Horizontal machining centers

MachineSpindle, tools, optionsTravels / capacity
2015 Matsuura H-Plus 300 cell20,000 RPM spindle, 15 pallets, 320 tools, full 4th axisX 19.68 · Y 22.042 · Z 19.68
2014 Matsuura H-Plus 30015,000 RPM spindle, 2 pallets, 60 tools, full 4th axisX 19.68 · Y 22.042 · Z 19.68
2014 Mazak HCN 5000 FMS12,000 RPM spindle, 6 pallets (Palletech), 120 tools, full 4th axis, Matrix Nexus controlX 28.74 · Y 28.74 · Z 29.13
Mazak FH-580/40 FMS cell (2 machines)25,000 RPM spindles, 120 tools, full 4th axis, 30-pallet Palletech systemX 28 · Y 24 · Z 26
Mazak FH-48012,000 RPM CAT40 spindle, 90 toolsX 22 · Y 22 · Z 20
  • Matsuura H-Plus 300
    Matsuura H-Plus 300
  • Mazak FH-580/40 FMS cell
    Mazak FH-580/40 FMS cell
  • 2014 Mazak HCN 5000
    2014 Mazak HCN 5000
  • Mazak FH-480
    Mazak FH-480

Common questions

How many pallets do your horizontal cells hold?

The Matsuura H-Plus 300 cell holds 15 pallets, the Mazak HCN 5000 FMS 6, and the two-machine Mazak FH-580/40 cell shares 30. A second H-Plus 300 runs 2 pallets.

Do the horizontals have a 4th axis?

Yes. The machine list shows a full 4th axis on the H-Plus 300s, the HCN 5000 and the FH-580/40 cell.

What lot sizes can you run?

From twenty-five pieces to thousands.

Get a quote: Horizontal machining & FMS

Need it fast? Call 541-608-0144.

  1. The part: drawing or part number, material, and any finish.
  2. Quantity: lot size and how often it repeats.
  3. When: the date you need parts, and any quality requirements (AS9100, FAI).

CallGet a quote